※ TIP-D9 is only used in the injection mold of multiple cavity.
※ Using screw-type heater and independent thermocouple ensures the reasonable heating power and precise temperature-controlling.
※ There are model #19、25、32 totally four standard # in this serial for choice to suit for different part forming.
※ It is suitable for the forming of each kind of plastics.
Features:
※ There is a small ring outside the plastic outlet, and the part plastic outlet is in good appearance.
※ The color-change quality is good, and the it is can be in sequential-control mold injection.
※ The cooling effect is good enough to reduce the cycle time to be short, and there is no plastic regrind, all of which will increase the production.
※ The installation is very simple, the protection of this nozzle is easy, the compatibility of the spare parts is very large.
※ There will be in good effect if it is used with the J type TC and the HOTTIP brand smart temperature controller.

Item#	length	heater model#	heater power#	Item#	length	heater model#	heater power#
TIP-D9-1946	46	H1935	325W	TIP-D9-1976	76	H1965	460W
TIP-D9-1956	56	H1945	350W	TIP-D9-1986	86	H1975	600W
TIP-D9-1966	66	H1955	400W	TIP-D9-1996	96	H1985	690W

Item#	length	heater model#	heater power#	Item#	length	heater model#	heater power#
TIP-D9-2556	56	H2550	460W	TIP-D9-2586	86	H2580	800W
TIP-D9-2566	66	H2560	600W	TIP-D9-2596	96	H2590	900W
TIP-D9-2576	76	H2570	690W	TIP-D9-25106	106	H25100	900W

Item#	length	heater model#	heater power#	Item#	length	heater model#	heater power#
TIP-D9-3260	60	H3260	800W	TIP-D9-32120	120	H32120	1200W
TIP-D9-3280	80	H3280	900W	TIP-D9-32150	150	H32150	1200W
TIP-D9-32100	100	H32100	1000W	TIP-D9-32200	200	H32200	1500W